How to Use Universal Cell Phone Charger Correctly

Universal cell phone charger is necessary charger for cell phone users now. Because it is easy to carry, you can discharge the battery for charging. But most of the users who first to use a universal charger don't know how to use in the right way. The mobile phone battery's charge contact point has three poles, and universal charger only has two poles which would be a little puzzling. As a cell phone charger China supplier, Goodscool will tell you how to do a proper use of universal charger, take this USA standard Universal charger for example:

First of all, you should take out of universal charger and cell phone batteries. Don't put universal charger with electricity.

Second, carrying a cell phone battery with the left hand and do not need to distinguish the both sides. Pick up the universal charger with right hand.

Third, Contact the copper pole at both ends of the mobile phone battery with universal charger's two poles. Because the mobile phone battery model is different and the poles point distance is different, it is necessary to branch off the same angle of universal charger's two pole pieces.

Next, Make their two poles connect, and then check universal charger's light. If it appears the red light hint, it means the poles joint correctly. If not, it means the two poles joint reverse.

Finally plug the universal charger for the board, there will be a red light flash jumping. This means that it is in the normal charge. Until the green light is bright, it means the battery has already been full.